Motorcycle Quickshifters and quick shifter systems and strain gauge quickshifter sensors
SHIFT GEAR FASTER
SMOOTHER BETTER
Quickshifter
Systems for Superbikes and more...
Key Features
Unique `Soft' feel sensor design
exclusive to Translogic Systems
Unique AST
(Adaptive Shift Technology)
Ltd for a smoother shift and less
gear lever stress for the user
Factory set
`DURASHIFT' TITANIUM GP
sensors using state-of-the-art
Smallest Multi Channel
quickshifter ECU in the world
CESGT (Controlled
Environment Strain Gauge Technology)
Won't flag up warning lights like
other quickshifter systems
Temperature immune sensors (no
need for temperature compensation)
Finest quality harness components
featuring Plug & Play
or other additional electronic
components or additional ECUs
connectors where applicable
3 piece tie rod kit supplied as
standard to enable tie rod lengths
`DURASHIFT' TITANIUM
Quickshifter GP sensors that don't
ranging from 80mm up to 280mm
need adjusting or setting up and
can't ever go out of adjustment
`DURASHIFT' TITANIUM
Quickshifter GP sensors constructed from ultra-
Dedicated bike specific tie rods
supplied where applicable
lightweight TITANIUM and special
stainless steel alloys
Sensor input process using
Translogic's IntellishiftTM
Detail
These are the smallest and most feature packed multi-channel Quickshifter
Systems in the world this `F' series
Quickshifter system is a full factory specification Superbike
quick shifter with
AST (Adaptive
Shift
Technology) + IntellishiftTM,
the world's first and only adaptive quickshifter which allows
you to shift up gears at constant or full throttle without the
use of the clutch for smoother up-shifts at any RPM.
This innovative system adapts itself to the RPM of the engine
bringing the engine back on line progressively at lower engine
revolutions simulating the action of the human hand/foot when
shifting gear. As the RPMs rise, each gear change
remains as smooth as possible as the `F' series ECU has 100s
of different interrupt durations at its disposal to execute
the perfect quick shift. In addition to these unique features
this Quickshifter system also carries out some other
AST features which go
even further to execute the perfect quickshift. Typically 3 yards can be gained
per gear shift and a saving of around 200ms can be made per
gear shift for those long staightaways but more than that,
our Translogic Quickshifter Systems enhances the motorcycle/vehicle
dynamics during upshifts making riding safer and more fun.
These Quickshifter systems are available with either `DURASHIFT'
TITANIUM GP pressure
sensors and universal tie-rod kit or with a linear sensor for direct
gear lever attachment, see fitment list for recommendations.
The Translogic
Systems Ltd `Industry award winning design' GP pressure sensors
do not require any adjusting and are a simple plug & play device
of unparalleled racing success, simplicity and reliability
is the key to continued racing success and the main reason
why Translogic Quickshifter systems are being used by OEM
companies the world over. Each sensor is calibrated
at our factory using state-of-the-art CESGT (Controlled Environment
Strain Gauge Technology) ensuring superior sensor
performance in the field in all conditions. The
`DURASHIFT'
TITANIUM GP pressure
sensors give Factory race team technicians the confidence that
each sensor performs exactly the same on each different race
bike installation. A 3 piece universal tie rod kit is
supplied with each quick shifter system featuring the GP pressure
sensors.
The Linear sensors
offer the ability
to install the Quickshifters to installations where a
tie rod is not present and the gear lever is directly attached
to the gear select shaft exiting the gear box. These Linear
sensors monitor the position of the gear lever for precise quickshifting
and offer repeatable quickshift triggering to 0.10mm.
The Linear sensors are triple sealed for longevity and share
many of the construction features of the GP pressure sensors.
See fitment list
for recommendations.
Ordering & Fitment list
|
SHIFT GEAR FASTER SMOOTHER BETTER |
|
|
|
| |
|
|
|
|
Quickshifter Systems for Superbikes and more... |
|||
Key Features
Detail
These are the smallest and most feature packed multi-channel Quickshifter Systems in the world this `F' series Quickshifter system is a full factory specification Superbike quick shifter with AST (Adaptive Shift Technology) + IntellishiftTM, the world's first and only adaptive quickshifter which allows you to shift up gears at constant or full throttle without the use of the clutch for smoother up-shifts at any RPM. This innovative system adapts itself to the RPM of the engine bringing the engine back on line progressively at lower engine revolutions simulating the action of the human hand/foot when shifting gear. As the RPMs rise, each gear change remains as smooth as possible as the `F' series ECU has 100s of different interrupt durations at its disposal to execute the perfect quick shift. In addition to these unique features this Quickshifter system also carries out some other AST features which go even further to execute the perfect quickshift. Typically 3 yards can be gained per gear shift and a saving of around 200ms can be made per gear shift for those long staightaways but more than that, our Translogic Quickshifter Systems enhances the motorcycle/vehicle dynamics during upshifts making riding safer and more fun. These Quickshifter systems are available with either `DURASHIFT' TITANIUM GP pressure sensors and universal tie-rod kit or with a linear sensor for direct gear lever attachment, see fitment list for recommendations.
The Translogic Systems Ltd `Industry award winning design' GP pressure sensors do not require any adjusting and are a simple plug & play device of unparalleled racing success, simplicity and reliability is the key to continued racing success and the main reason why Translogic Quickshifter systems are being used by OEM companies the world over. Each sensor is calibrated at our factory using state-of-the-art CESGT (Controlled Environment Strain Gauge Technology) ensuring superior sensor performance in the field in all conditions. The `DURASHIFT' TITANIUM GP pressure sensors give Factory race team technicians the confidence that each sensor performs exactly the same on each different race bike installation. A 3 piece universal tie rod kit is supplied with each quick shifter system featuring the GP pressure sensors.
The Linear sensors offer the ability to install the Quickshifters to installations where a tie rod is not present and the gear lever is directly attached to the gear select shaft exiting the gear box. These Linear sensors monitor the position of the gear lever for precise quickshifting and offer repeatable quickshift triggering to 0.10mm. The Linear sensors are triple sealed for longevity and share many of the construction features of the GP pressure sensors. See fitment list for recommendations.
Ordering & Fitment list